Top Reasons Your Water Heater Isn’t Working properly and How to Fix It

Reasons-Your-Water-Heater-Isnt Working
Share on facebook
Share on twitter
Share on pinterest

Table of Contents

Introduction

 

Modern water heaters are specifically built so that they can last. Many of them come with long warranties, and you will always hope to use them trouble-free for many years. 

However, the combination of the water and all the various components which make these heaters work can inevitably cause unforeseen problems.  

Most water heaters have a pressure relief valve specifically engineered to discharge pressure from the water tank that becomes too high. Removing and replacing the pressure may relieve the valves is not complicated. 

If the valve on top of the theater heater begins to leak during a water heater repair in Auburn, WA, we recommend purchasing a new water heater from a local store or online. You can reach out to Dicks Heating for water heater repair in Tacoma, WA. 

 

Common Water Heater Problems & solutions

 

Loose or damaged in-line valve

 

Unlike the water leak near the bottom of the tank, the water leak on the top of the system can be easily fixed. One of the tank leaks’ most common uses is the loose in-line valve. This is the handle located at the top of any water tank, specifically built to activate or deactivate the flow of the water. To fix all these problems, you may need to secure the nut which holds the ball or in-line valve in the location. If the leak becomes way more severe once tightened, you may be required to travel to the local hardware store to purchase the new valve for the water heater replacement in Puyallup, WA.

 

No warm water

 

If you have an electric water heater in the home, most of the typical causes of a lack of warm water are broken heating elements. The water heater has two heating elements for heating the incoming water tank. 

On the other hand, various problems may stop warm water production in the gas water heater. The blown-out pilot light or the malfunctioning gas valve can produce this issue. If the hot water is not working, you must either purchase new parts or call any licensed plumber to receive help with the water heater repair in Puyallup, WA.

 

Low supply of hot water 

 

Once a hole or crack begins forming in the system’s dip tube, if you are continuously running out of warm water, then this issue is the byproduct of a cracked dip tube. The tube is built to push cold water to the base of the water tank to be heated. Since installing the new dip tube is complicated, we recommend you call the technician for water heater repair in Kent, WA

 

The water is way too warm or cold.

 

If the water in the shower feels uncomfortable, hot, or cold, then you may have to adjust the temperature of the water by changing the settings on the thermostat. You can also adjust the thermostat to 140 degrees Fahrenheit to make the showers pleasant. If the hot water is not working while you change the temperature, this is the broken thermostat indicator. Immediately find a certified heating or plumbing contractor for water heater replacement in Auburn, WA, or to repair the thermostat effectively. 

 

Low water pressure

 

The only way to eliminate the water heater problem is to connect new water lines to the system. The malfunctioning water only sometimes causes low water pressure. If you live in an old home with smaller water pipes, the water flow will be restricted before reaching the bathroom or kitchen. Another type of problem which may negatively impact the water pressure includes calcium deposits in the water pipes. 

 

Discolored water

 

The water coming from the sink in the house must be clean. This is a sign of deterioration in the water tank or on the water heater’s anode rod.

As the rust spreads on the water tank’s interior, small cracks will begin to form.

 

Save your Water Heater With Maintenance Experts

 

Often, the most crucial thing you can do is to identify the problem in the right place at the right time.  If you ignore the problem, it will not magically disappear but worsen over time and cause more issues. For water heater repair in Sumner, WA, including malfunctioning the gas valve, cracked dip tubes, or broken heating elements, give us a call or book an appointment on our website. Our team comprises highly skilled technicians who offer water heater installation or repair with complete honesty & transparency.

Share this post with your friends

Share on facebook
Share on twitter
Share on linkedin

Leave a Comment

Your email address will not be published. Required fields are marked *

What to expect from your Free Quote?

Thank you for your interest in Alpha Bravo Septic & Drainage. We will respond to your request as quickly as possible. So that we may better assist you, please note that all fields with an asterisk must be filled in.

Your Contact Details

What to expect from your Free Quote?

Alpha Bravo Septic & Drainage is proud to be your go to provider of septic tank servicing, inspection, and repair. In addition to that, we offer drainage and drain cleaning solutions. Your septic and drainage systems for your home or business are key to keeping your whole home running properly, and you can trust our experience and professionalism to handle these issues for you.

Like any business, we have set hours but sometimes an emergency problem requires an emergency solution. 

We try to be responsive in today’s world of connectedness!

WE UNDERSTAND!  Text, call, or email us anytime, any day of the week.